Description
ONE-1250 – seriesOne Drip-Free Shaft Seal for a 1 1/4 Inch Propeller Shaft
Parts Included in This Kit:
ONE-A-1250 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1250-2 x 1
The minimum distance required from the end of the stern tube to the coupling is 7 inches.
Water from raw water feed to SureSeal that delivers a minimum of 1 gallon per minute at engine idle speed and increases as you throttle up, at a minimum of 2 psi.
Available Sizes & Configurations
| SKU | Size / Options |
|---|---|
| ONE-1250-1625-M | Stern Tube Od: 1625 | Hose Convolution Type: Type M |
| ONE-1250-1750-M | Stern Tube Od: 1750 | Hose Convolution Type: Type M |
| ONE-1250-1750-S | Stern Tube Od: 1750 | Hose Convolution Type: Type S |
| ONE-1250-2000-M | Stern Tube Od: 2000 | Hose Convolution Type: Type M |
| ONE-1250-2000-S | Stern Tube Od: 2000 | Hose Convolution Type: Type S |
| ONE-1250-2250-M | Stern Tube Od: 2250 | Hose Convolution Type: Type M |
| ONE-1250-2250-S | Stern Tube Od: 2250 | Hose Convolution Type: Type S |
| ONE-1250-2500-M | Stern Tube Od: 2500 | Hose Convolution Type: Type M |
| ONE-1250-2500-S | Stern Tube Od: 2500 | Hose Convolution Type: Type S |
| ONE-1250-2750-M | Stern Tube Od: 2750 | Hose Convolution Type: Type M |
| ONE-1250-2750-S | Stern Tube Od: 2750 | Hose Convolution Type: Type S |
| ONE-1250-3000-M | Stern Tube Od: 3000 | Hose Convolution Type: Type M |
| ONE-1250-3000-S | Stern Tube Od: 3000 | Hose Convolution Type: Type S |
Reviews
There are no reviews yet.