TS-3003-BRS Three Tank Sentry System – 2-3/4″ W x 4-1/8″ H Panel – 1-1/4″ MPT Brass Tank Adapters

Tank Sentry Fluid Level Monitors Our programmable fluid level monitors provide reliable and accurate Tank level indication. There are no moving parts to foul, or electrical components inside the tank. Unaffected by floating solids or stray current, Tank Sentry is the ideal solution for the toughest of fluid level monitoring assignments. All Tank Sentrys fluid level sensors operate on 12 to 32 volt DC power. With a few simple adjustments they are capable of monitoring tanks from 6 inches to 6 feet deep, right out of the box. All models have 10% incremental LED displays. All units include a monitor panel, 30 feet per tank of shielded 18/3 wire, 1 SYM-2Q sensor module per tank, 10 feet of urethane tubing per tank, 1 TPA-1250 1-1/4” tank penetration assembly per tank, and 3 heat shrink wire connectors. Installation accessories such as extra wire, mounting flanges, and pump relays are sold separately. Product Description/Specifications:

• No electrical or moving parts in contact with fluid
• Simple calibration for tanks from 6”(152mm) – 108”(2.7m)
• Programmable alarms with mute switch
• Programmable pump controls
• Constant precise tank status information
• Models for sewage, water, diesel, and other fluids
• Easily combined with onboard computer systems

WTS-1500B Ideal for holding and grey water tanks. Set the level to initiate and terminate the pumpout with simple to operate slide switches. Pump controller operates D.C. relays for switching AC or DC pumps (order relays separately). Also features high level audible and visible alarm. Panel dimensions 6-1/8”(156mm) x 4-5/8”(118mm) TS-1501B This model engages relay at low level, and disengages at high level to provide a programmable “pump up” control, and low level alarms. Used to fill day tank from main tank. Panel dimensions 6-1/8”(156mm) x 4-5/8”(118mm) TS-2000B Features both high and low level audible and visual alarms with remote alarm capability. Ideal for diesel tanks where fill without spill is desired. Panel dimensions 6-1/8”(156mm) x 4-5/8”(118mm) WTS-1100B Designed for precise monitoring of tanks where high level visual and audible alarms are required. Ideal for holding tanks. Features dry closure for remote alarm or “do not flush” lights. Panel dimensions 2-3/8” x 3-7/8” 60mm x 98mm TS-2500B Designed for precise monitoring of tanks where low level visible and audible alarms are required. Ideal for diesel or water tanks. Features dry closure for remote alarm or dry tank shutdown of freshwater pump. Panel dimensions 2-3/8” x 3-7/8” 60mm x 98mmTank Sentry 3000 Series Developed to monitor multiple tanks on a single compact panel, the 3000 series provides tank level indication for up to five tanks. These tanks can contain different fluids. Use the 3000 series in conjunction with other Tank Sentrys as repeaters that provide tank information in different locations. The last number of the part number designates the number of tanks on the system. Product Description/Specifications:

• Delivers visual information at a glance
• Continuous, simultaneous display of up to 5 tanks
• Compact display
• Can be combined with other Tank Sentrys to provide dual monitoring stations

Headhunters own skilled technicians test each Tank Sentry system as many as seven different times during their assembly including a 6 hour “burn in” and an 8 hour computer monitored cycle test. All Headhunter electronic products are then protected from the harsh marine environment by our unique UL listed epoxy encapsulation process. TS-4000 Tank Sentry Alarm Systems The TS-4000 is as simple as it gets for reliable single-point level indication, and as with all of our Tank Sentry series, no mechanical or electrical components contact the fluid being monitored. When liquid rises above a preset level in the tank being monitored, an innovative, pressure-activated switch signals both a visual alarm (a brilliant red blinking LED), and a piercing high-decibel audible alarm The TS-4000 also features a unique On-Off-Mute toggle switch with a built-in bi-color LED indicator. When the switch is in its central, “off” position, the LED is unlit. When the system is switched “on”, the LED is green, and when the system is on but the audible alarm is muted (“mute”), the LED is yellow . Product Description/Specifications:

• Provides reliable high level indication
• Ideal for holding tanks
• Can be used as secondary remote alarm
• Simple to install
• Operates on 12V, 24V, or 32V DC
• No moving parts
• UL listed for water-based fluids
• Ignition protected

REMOTE ALARM OPTIONS The monitor panel (MO-4000) can be purchased separately and used as a remote alarm for high or low level indication, in conjunction with one of our existing line of Tank Sentry products. For example, Tank Sentry model WTS-1100B could be used to monitor a holding tank, and the MO-4000 (B or W) could be installed in a location where continuous monitoring of the holding tank is not required, but high level notification is desired. Product Description/Specifications:

• Dimensions 3”(76mm) H x 2”(51mm) W x 1.35”(35mm) D
• Voltage Operates on 12V, 24V, or 32V DC
• Amps .780 Amps Max @12V DC
• Temperature Range 40º F-150º F (4º C-66º C)
• TPA-4125 Switch Contacts Features NO and NC, .125A@125V AC
• TPA-4125 Material SCH. 80 PVC, Polyurethane, Polysulfone
• Panel Material Anodized/Powder Coated Aluminum, Polyurethane
• Deadband Range 2” (51mm) Water

Each complete TS-4000 system consists of:

• 1x MO-4000 (B or W)
• 1x TPA-4125
• 4x Stainless Steel Black Oxide Mounting Screws
• 2x 16-Gauge Female Quick-Connect Wire Connectors
• 30ft Of 16-Gauge, Two-Conductor Marine Cable
• TS-4000B Complete High-Level Alarm System w/Black Panel
• TS-4000W Complete High-Level Alarm System w/White Panel
• MO-4000B Remote Alarm Panel Only w/Black Panel
• MO-4000W Remote Alarm Panel Only w/White Panel
• TPA-4125 1-1/4” MPT Tank Penetration Assembly
• TS-ENC2X3 Enclosure Box For Bulkhead Mount Of MO-4000 (B or W)
• FLG-1250 1-1/4” PVC Tank Flange